g r a y h i l l 8 7 6 5 4 3 2 1 .066 .005 (1,68 0,13) .152 .005 (3,86 0,13) .230 .050 (5,84 1,27) g r a y h i l l 8 7 6 5 4 3 2 1 3/8-32 unef-2a thread . to be within .030 (0,76) of shoulder 4.0 .20 (4.0 5,08) .100 (2,54) stripped and tinned 28 aw g cable wires on .050 (1,27) center connect or is amp p/n 215083-8 .933 (23,69) ref . .040 (1.02) 62cxxxx-xx-xxxc xxxx x-x .312 .005 (7,92 0,13) .375 .015 (9,53 0,38) .375 .015 (9,53 0,38) .250 .005 (6,35 0,13) .250 .005 (6,35 0,13) .250 .002 (6,35 0,05) .125 .002 (3,18 0,05) .490 .010 (12,45 0,25) .460 .010 (11,68 0,25) .360 .010 (9,14 0,25) .094 .004 (2,39 0,1) .219 .004 (5,56 0,1) .540 .010 (13,72 0,25) .500 .010 (12,7 0,25) .250 .005 (6,35 0,13) .250 .005 (6,35 0,13) c l c l pin ve r sion cable ve r sion .580 (14,73) series 62c concentric shaft fe atures ? economical size ? combined functionality ? optically coupled for more than a million cycles of operations ? optional integral pushbutton ? compatible with cmos, ttl, and hcmos logic ? available with 12, 16, 24, and 32 detent positions for deck ? choices of cable length and terminations ? available in 3.3 volt input (contact grayhill for details) dimensions in inches (and millimeters) appli cations ? used to set radio frequency, drill depth, rpm, menu selection, parameter selection for patient monitoring devices, etc. unless otherwise specifed, standard tolerance are: linear .025 diameter .010 angle 2.0 deck a: 0.250 (6,35) shaft deck b: 0.125 (3,18) shaft grayhill, inc. ? 561 hillgrove avenue ? lagrange, illinois 60525-5997 ? usa ? phone: 708-354-1040 ? fax: 708-354-2820 ? www.grayhill.com optical and mechanical encoders optical encoders
available from your local grayhill distributor. for prices and discounts, contact a local sales offce, an authorized local distributor or grayhill. custom shaft, pushbutton actuation force and termination options are available. specifi cations pushbutton switch ratings r ating: 5 vdc, 10 ma, resistive contact resistance: less than 10 ohms (ttl or cmos compatible) voltage breakdown: 250 vac between mutually insulated parts contact bounce: less than 4 ms at make, less than 10 ms at break actuation life: 3,000,000 operations actuation force: 1000 300 grams pushbutton travel: .010 / .025 inch encoder ratings coding: 2-bit quadrature coded output operating voltage: 5 .25 vdc supply current: 50 ma maximum at 5 vdc logic high: 3.8v minimum logic low: 0.8v maximum logic r ise and fall times: less than 30 ms operating torque: 2.0 in-oz 1.4 in-oz initially r otational life: more than 1,000,000 cycles of operation (1 cycle = 360 rotation) shaft push out force: 45 lbs minimum mounting torque: 15 in-lbs maximum operating speed: 100 rpm maximum axial shaft play: 0.010 max. for each shaft e nvironmental ratings operating temp. range: -40c to 85c storage temp. r ange: -55c to 100c r elative humidity: 90C95% at 40c, 96 hrs. vibration resistance: harmonic motion with amplitude of 15g, within a varied 10 to 2000 hz frequency for 12 hours per mil-std-202, method 204 shock r esistance: test 1: tested at 100g for 6 ms, half sine, 12.3 ft/s test 2: 100g for 6 ms, sawtooth, 9.7 ft/s circuitr y, t r uth tabl e and waveform: standard quadrature 2-bit code materials and finishes bushing: zinc casting shaft: aluminum shaft retaining ring: stainless steel detent spring: stainless steel printed circuit board: nema grade fr-4 terminals: brass, tin-plated mounting hardware: one brass, nickel-plated nut and zinc-plated spring steel with clear trivalent chromate fnish lockwasher supplied with each switch. (nut is 0.094 inches thick by 0.433 inches across fats) rotor: thermoplastic code housing: reinforced thermoplastic pushbutton dome: stainless steel pushbutton housing: thermoplastic pushbutton contact: brass, nickel-plated dome r etaining disk: thermoplastic strain r elief: stainless steel cable: 28 awg, stranded/top coated wire, pvc coated on .050 centers (cable version) header pins : phosphor bronze, tin-plated insulator : glass-flled polyester spacer : zinc casting ordering infor mation clockwise rotation position output a output b 1 2 3 4 ? ? ? ? ? indicates logic high; blank indicates logic low. code repeats every 4 positions. series style: c = concentric angle of throw (deck a): 11 = 11.25 or 32 positions, 15 = 15 or 24 positions, 22 = 22.5 or 16 positions, 30 = 30 or 12 positions angle of throw (deck b): 11 = 11.25 or 32 positions, 15 = 15 or 24 positions, 18 = 18 or 20 positions, 22 = 22.5 or 16 positions, 30 = 30 or 12 positions 62c 2211 - 02 - 040 c termination: s = stripped cable, c = connector, p = pins cable termination: 040 = 4.0in. cable is terminated with amp connector p/n 215083-6. see amp mateability guide for mating connector details. * eliminate cable length if ordering pins. (ex: 62c2211-02-p) pushbutton option: 01 = w/o pushbutton 02 = with pushbutton output a output b high low high low position number 1 2 3 4 5 6 8 7 6 5 4 3 2 1 power +5v output a deck a output b deck a output a deck b output b deck b n.o. pushbutton switch deck b ground * external pull-up resistors required for operation ( 2.2k?) r* r* pin# r* r* optical and mechanical encoders grayhill, inc. ? 561 hillgrove avenue ? lagrange, illinois 60525-5997 ? usa ? phone: 708-354-1040 ? fax: 708-354-2820 ? www.grayhill.com optical encoders
|
